Technical guides
What we have been answering on the phone since 1956, written down. Which grit for which substrate, in which order, with which machine.
-

Which abrasive grit to sand a wood floor
The grit is only a number. What decides the result is also the abrasive material, the backing, and the format your machine takes. Here is what the catalogue actually contains.
5 min read
-

Belt sander, single disc machine, disc sander: what each machine does
Three families of machines, three ways of removing material. Here is what each one does, with the specifications taken from the models SIMA distributes.
5 min read
-

Sanding right to the edge: skirting boards, stairs, under radiators
The big machine stops a few centimetres from the wall. What is left is the most visible strip in the room. Here are the machines in the catalogue that deal with it.
4 min read
-

Water-based or solvent-based floor finish: read the range before choosing
The SIMA range is read along two lines: water-based or solvent-based on one side, traffic class on the other. Once these two questions are answered, only the sheen is left to choose.
5 min read
-

Oiled, waxed or lacquered wood floor: which maintenance product, which pad
The first question is not which product to buy, but how your wood floor is finished. A maintenance product for lacquered wood floors has no business on an oiled wood floor.
6 min read
-

Before sanding: measure moisture, lift the old floor, fill
A wood floor laid on a subfloor that is too damp or badly prepared has to be redone, and redoing it costs more than laying it. Here is what the catalogue offers for each step of this phase.
7 min read